Your Rental



First Day ? $0.00
Addt'l Day 3-Day Wknd Full Week
$0 $0 $0 $0
Replacement Value: $5,625.00 ?

We require insurance or a major credit card to hold the replacement value of the equipment you are renting


SkyPanel is a compact, ultra-bright and high-quality LED soft light that sets a new standard for the industry. With a design focused on form, color, beam field and output, SkyPanel represents the culmination of more than a decade of research and development of LED technology at ARRI.

SkyPanel will initially be available in two sizes: the S60 and S30. The S60 is a midrange model, featuring a light aperture of 645 x 300 mm and accommodating the vast majority of applications. The S30 is a smaller, more portable version; half the length of the S60, it is perfect for on-the-go mobile applications. Both models are available in fully color tuneable and remote phosphor versions.

Incorporating features of ARRI's successful L-Series LED Fresnels, SkyPanel is one of the most versatile soft lights on the market, as well as one of the brightest. Like the L-Series, SkyPanel 'C' (Color) versions are fully tuneable; correlated color temperature is adjustable between 2,800 K and 10,000 K, with excellent color rendition over the entire range. Full plus and minus green correction can be achieved with the simple turn of a knob and in addition to CCT control, vivid color selection and saturation adjustment is also possible.

Unlike other tuneable fixtures, SkyPanel makes no sacrifice when it comes to light output. SkyPanel puts out a tremendous amount of light, in a soft and uniform beam field. Brighter than a 2 kW tungsten soft light or a 6 kW tungsten space light, the SkyPanel S60 has more than enough light for most applications. At the same time, the lamphead is able to perform beautifully at lower light levels. This range of illumination and color gives users an unprecedented amount of control.

The SkyPanel's low power consumption allows the fixture to be operated in many locations, using many different sources of power. With the on-board battery input, SkyPanel can easily run off industry-standard batteries. Powerful, beautiful soft light need no longer be tethered to the wall or generator. The S60 can be operated at up to 50% of its total power while on battery, and the S30 can be used at full power.

Made in Germany to the high standards for which all ARRI products are known, SkyPanel is built to last - constructed from resilient materials and assembled by hand with great care. Other features include an on-board battery input for mobile applications, LAN port for network connectivity, USB-A port for firmware updates via thumb drive and many more.

ARRI S60-C SKYPANEL Specifications

Optical System
Soft Diffusion Panel
Light Aperture
645 x 300mm / 25.39 x 11.81"
Beam Angle
110 deg. (Half Peak Angle)
Steel Yoke, High Strength Tilt Lock, Pole Operation Option (Pan & Tilt)
28 mm Spigot (Junior Pin)
Tilt Angle
+/- 90 deg.
Lamphead Voltage Input
48V DC
Power Consumption
420 W Nominal, 450 W Maximum
Lamphead Power Connection
Male 3-Pin XLR - 15 amp (Pin 1: Negative / Pin 2: Positive)
Battery Connector
Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive)
Battery DC Voltage Range
23 - 36V DC
Battery Mode Light Output
50% of Total Output
White Light
2800K - 10000K Continuously Variable Correlated Color Temperature
Colored Light
Full RBG+W Color Gamut with Hue and Saturation Control
Color Temperature Tolerance
+/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
Color Rendition
CRI Average > 95, TLCI Average > 90
Green-Magenta Adjustment
Continuously Adjustable (Full Minusgreen to Full Plusgreen)
0 - 100% Continuous
On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN Network Connectivity, USB-A
Remote Device Management (RDM)
DMX Setup, Hour Counter and Standard RDM Commands
USB Interface
DMX Setup, Fixture Status and Firmware Upgrade Through PC, Mac and USB Stick
Ambient Temperature Operation
-20 to 45 deg. C / -4 to 113 deg. F
Protection Class
IP 20
Estimated LED Lifetime (L70)
50000 hours
Estimated Color Shift Over Lifetime
< 200 K
Certifications (pending)
Power Supply
Input Range: 110-240 VAC, 50/60 Hz
Output Range: 48 V DC
Power Input Connection: powerCON TRUE1 (Bare Ends / Schuko / Edison Cables Available)
Power Output Connection: Female 3-Pin XLR - 10 Amp (Pin 1: Negative / Pin 2: Pos
Manual Version: 26.5lbs / 12.02kg
Pole Op Version: 28.7lbs / 13.02kg