Your Rental
Pickup
Return
DJI RONIN 3-AXIS GIMBAL STABILIZER

DJI RONIN 3-AXIS GIMBAL STABILIZER

SKU: DJIRONIN

First Day ? $0.00
First
Day
Addt'l Day 3-Day Wknd Full Week
$0 $0 $0 $0
Replacement Value: $2,099.00 ?

We require insurance or a major credit card to hold the replacement value of the equipment you are renting

DJI RONIN 3-AXIS GIMBAL STABILIZER Features

"The DJI Ronin 3-Axis Brushless Gimbal Stabilizer is an effective handheld camera stabilizer for the filmmaking professional. It accommodates any cinema camera or HDLSR up to 16 pounds. A computer-controlled three-axis gimbal system (preventing side-to-side roll, keeping the horizon level, and tilt and pan) is precise to +/- 0.02 degrees. Movement is detected via an inertial measurement movement and algorithms are deployed that can detect the difference between accidental shake and intentional camera rig movements. When mounted to moving vehicles, the Ronin can stabilize rough motions that rigid couldn't handle. The Ronin sets up quickly, a time-saving feature on set.

What you should know about the Ronin:

• 1. Auto-tune stability: Using the SmoothTrack Tuning feature, camera orientation will pan and tilt in the direction the gimbal is moved, then reduce compensation speed based on user movement. This feature can be fine-tuned as needed.

• 2. 2nd operator controls: Remote transmitters let a second operator operate the pan, tilt and roll independent of the camera operator's movement. This way the gimbal operator can focus on gimbal movement while a second operator can concentrate on camera movement. This is also a useful feature when doing drone shoots. A feature-rich bluetooth assistant software aids in remote operation.

• 3. Quick and easy setup: The Ronin should take less than 5 minutes to set up very important when every second counts on set. No tools are needed for setup or adjustment.

• 4. 3 operation modes: Upright (eye-level shooting); Underslung (allows camera operator to hold the camera at chest to ground level); Briefcase (slimmer profile, helpful when moving through doors or narrow paths).

• 5. Automatic configuration: Once you've set up the rig, tap Auto Tune Stability to tune the Ronin to be used. It uses artificial intelligence to adjust parameters based on your camera's weight and adjusts each axis until it finds the optimal setting.

DJI RONIN 3-AXIS GIMBAL STABILIZER Specifications

Built-In Functions
1. Three Operation Modes - Underslung Mode - Upright Mode - Briefcase Mode
2. Built-in independent IMU module
3. DJI Specialized Gimbal Drive Motors with Encoders
4. Bluetooth Module
5. USB Connection
Accessory Power Connections
12V regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power
4S Ronin Battery
Connections
2.4GHz Remote Control, Bluetooth, USB
PC Assistant Software Requirements
Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)
Mobile Assistant Software Requirements
iOS version 6.1 or above Mobile Device iPhone 4s, iPhone 5, iPhone 5s, iPod touch 4, iPod touch 5 , iPad 3, iPad 4, iPad mini
Working Current
Static current: 300mA (@16V)
Dynamic current: 600mA (@16V)
Locked motor current: Max 10A (@16V)
Operating Temperature
-15°C ~ 50°C (5°F ~ 120°F)
Weight
4.20kg (9.26lbs) fully loaded with handlebar
Gimbal Dimensions
24.4"(W) x 11"-15"mm (D)x 19.6"(H)
620mm(W) x 280-380mm (D)x 500mm(H)
Supported Camera Dimensions
Maximum depth at center of mass on camera base plate: 5.5" / 140mm
Maximum height measured from top of camera base plate: 8.9" / 225mm
Maximum width: 7.65" / 195mm
Load Weight (Reference Value)
7.25kg (16lbs)
Controlled Angle Accuracy
0.02°
Maximum Controlled Rotation Speed
Pan axis: 90°/sec
Tilt axis: 100°/sec
Roll axis: 30° /sec
Controlled Rotation Range
Pan axis control: 360°
Tilt axis control: Up 45° to Down 120°
Roll axis control: +/- 25°
See More Similar Mobility & Stabilization: