Teradek radek Bolt Pro 1000 3G-SDI/HDMI Transmitter and 3x Receiver Kit
Teradek : Picture 1 thumbnail Teradek : Picture 2 thumbnail Teradek : Picture 3 thumbnail Teradek : Picture 4 thumbnail Teradek : Picture 5 thumbnail Teradek : Picture 6 thumbnail
Teradek

RENT Teradek Bolt Pro 1000 3G-SDI/HDMI Transmitter and 3x Receiver Kit

SKU: ~TDBOLT1KX3

First Day ?
Daily
Price		 3-Day Wknd
Price		 Weekly
Price
$475 $475 $1,425
$475.00

Set your Rental Period to see your cost.

Your cost for

Replacement Value: $12,594.06 ?

We require insurance or a major credit card to hold the replacement value of the equipment you are renting

Not available for your selected rental period.

Call us at 212.627.8487 to discuss availability
Call to rent
customer service representative icon

Questions?

If you need assistance or have any questions at all, we’re ready to help.

This Kit Includes

  • (3) x Teradek Bolt 1000 3G-SDI/HDMI Receiver
  • Teradek Bolt Pro 1000 SDI/HDMI Transmitter
  • (3) x Teradek 18 Watt AC Adapter 6' Cable to 2-pin Lemo
  • (4) x Teradek 18" 2-Pin Lemo to PowerTap Adapter Cable
  • (6) x Belden 3' 3G-SDI BNC Cable
  • (17) x Teradek Small Antenna
  • (4) x Teradek TX/RX 1/4-20" Thumb Screw
customer service representative

Questions?

customer service representative icon

For more information on this item, questions about rates, special requests, or if you need any assistance, we’re here for you.

Call 212.627.8487

Email rent@adorama.com

Submit a Request Form

Details

RENT Teradek Bolt Pro 1000 3G-SDI/HDMI Transmitter and 3x Receiver Kit Features

With highly refined software, new wireless radios and a redesigned chassis, these new models are the most reliable and capable monitoring solutions Teradek have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable, manual frequency selection and USB 3.0 GRAB Engine are all included on these new models but with the following new features:

Longer Range
Transmit visually lossless video up to 1000ft with no delay.

20MHz Channels
Use more than twice as many Bolts in one location or avoid interference like never before.

2 New DFS Channels
Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels.

20% Smaller Chassis
Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.

Individual Identity
Easily identify which BoltTX and RX work together with removable colored top plates.

Rapid Reconnection
Reconnect times during a dropped link are now instantaneous once you move back into range.

Built-In HDMI to SDI Converter
Perfect for use with MoVI and other gimbals, Bolt's TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.

More Robust
Than Ever BeforeReach your Bolt's full range and potential right out of the box with new software that provides the most robust wireless link they have ever created.

Teradek Bolt Pro 1000 3G-SDI/HDMI Transmitter and 3x Receiver Kit Specifications

Bolt Pro 1000 TransmitterJump to...

Video Inputs
1 x BNC, SD/HD/3G-SDI
1 x HDMI Type A
Video Output
1 x BNC, loop-through output
Video Delay
Transmitter to Receiver: <0.001 sec (when no video format conversion is enabled)
Color Sampling
YCbCr = 4:2:2, 8-bit for SDI (10-bit, without format conversion and FPGA v1.1.0 or later)
RGB 4:4:4 (HDMI out, 8-bit color)
Supported Resolutions
1080p 60/59.94/50/30/29.97/25/24/23.98
1080PsF 30/29.97/25/24/23.98
1080i 60/59.94/50
720p 60/59.94/50
576p 50 (via HDMI port only)
480p 59.94 (via HDMI port only)
NTSC
PAL
Wireless
Up to 1000' (300m) line of sight
Non-DFS Frequencies: 5.19 to 5.23 GHz and 5.755 to 5.795 GHz
DFS Frequencies: 5.27 to 5.55 GHz and 5.67 GHz
RF Power
19 dBm EIRP (with two 2 dBi transmitter antennas)
Audio
Format Support: 48 kHz, 24-bit PCM
Operating Temperature
32 to 122 degree F (0 to 50 degree C)
Power
2-Pin LEMO 7 to 28 VDC
Consumption: 7.5 W
Dimensions
0.9 x 2.6 x 4.5" (2.3 x 6.6 x 11.4 cm)
Case: 12 x 9.0 x 4.5" (30.5 x 22.9 x 1.4 cm)
Weight
8 oz (226 g)

Bolt Pro 1000 ReceiverJump to...

Video Output
1 x Micro-USB 3.0
1 x BNC, 75 Ohms
1 x HDMI Type A
Video Delay
Transmitter to Receiver: < 0.001 sec (when no video format conversion is enabled)
Color Sampling
YCbCr = 4:2:2, 8-bit for SDI (10-bit without format conversion and FPGA v1.1.0 or later)
RGB 4:4:4 (HDMI out, 8-bit color)
Supported Resolutions
1080p 60/59.94/50/30/29.97/25/24/23.98
1080PsF 30/29.97/25/24/23.98
1080i 60/59.94/50
720p 60/59.94/50
576p 50 (via HDMI ports only)
480p 59.94 (via HDMI ports only)
480i (NTSC) / 576i (PAL)
Wireless
Up to 1000' (304.8 m) line of sight
Non-DFS Frequencies: 5.19 to 5.23 GHz and 5.755 to 5.795 GHz
DFS Frequencies: 5.27 to 5.55 GHz and 5.67 GHz
RF Power
19 dBm EIRP (with two 5 dBi transmitter antennas)
Noise Rejection
Can coexist with Wi-Fi and 5 GHz cordless phones
Interface
OLED display with joystick navigation buttons
Audio
Format Support: 48 kHz, 24-bit PCM
Material
Milled aluminum
Mounting
Multiple mounting options with 4-40 holes
Multiple mounting options with 1/4"-20 hole
Power
2-Pin LEMO 7 to 28 VDC
No internal battery
Consumption: 7.5 W
Dimensions
5.5 x 3.5 x 1.0" (14 x 8.9 x 2.5 cm)
Case: 12 x 9.0 x 4.5" (30.5 x 22.9 x 11.4 cm)
Weight
13.3 oz (376 g)
See More Similar Video Signal Converter Rentals:
Jump to: Details Specifications